Marine Chandlery
Marine supplies and accessories for both power boating and sailing.Boating Accessories
Trailer accessories, life vests, fuel tanks, lubricants, anchors etcAllegro Industries 952036M 8″ DC Plastic ComPaxial Blower System with MVP
The Complete Ventilation System from Allegro includes everything you’ll need for your confined space site. Included is the lightweight plastic blower, six feet and fifteen feet of ducting with a storage bag, and Manhole Ventilation Pass thru (MVP).
Features
- Blower: Polyethylene housing; 1/3 HP; UL Recognized, CSA Certified, CE Certified; 115V-230V AC, 50/60Hz, Single Phase, All World Motor
- System includes 8″ AC Plastic Axial Blower, 6′ & 15′ of ducting, storage bag, and an 8″ MVP
- MVP: Linear Low Density Polyethylene (LLDPE); Recyclable; Bright Yellow
- Ducting: Vinyl and polyester with PVC coating; Compressible inner support coils; Heat resistance up to 180°F (88.2°C)
Related Products
Attwood Blower H20 Resist (White, 3-Inch)
Turbo 3000 water resistant blower, white Features Patented in-line design ¿ provides ventilation for engine compartments, galleys, bilges, and heads Install with no.10 fasteners, individual carton includes 2 tie straps All are CE certified 16-gauge tinned and caulked copper wire leads with optional MP1 molded rubber connectors
Rule 140 Marine Bilge Blower (3-Inch, Inline)
Rule In-Line Blower – 3″ DuctingDesigned for efficient, high output operation, these blowers feature our exclusive front and rear shaft seals and corrosion resistant motor housings for long life. Compact and easily installed on any flat surface, Rule® in-line blowers provide higher air flow, lower amp draw, and quieter operation than standard blowers. 3 Year […]
Sierra International 116-400-3000W 3″ X 50′ White Marine Blower Hose
Shields Vinylvent Ducting Hose is PVC supported by anodized wire helix. It is resistant to UV and the ozone. This hose is primarily used for venting of bilge fumes. Vent Hose, 3″ x 50′, White MPN: 116-400-3000W
Jabsco 3-Inch Flange Mount Blower (150 CFM 12V)
150 CFM Tough Reinforced Plastic Housing * Outlet flange mounts directly on bulkhead. * Mount to Any Flat Surface * Slip-On Inlet Ducting Connection * Efficient High Volume Air Flow * Dimensionally stable quiet running Delrin rotors. * Low-Current Draw * Corrosion resistant materials throughout. * Complies with USCG 183.410 and ISO 8846 MARINE (Ignition […]