CE Smith Trailer Roller Guide-On

CE Smith Trailer, 27610, Roller Guide-On. These smooth rolling guides assist in centring the boat onto the trailer.  Ideal for retrieving your boat on shallow ramps where the trailer is not far into the water, when you are alone, or have a crosswind or current pushing the boat. Uprights with rollers come fully assembled, ready for installation.  For larger trailer frames check out our Large Frame U-Bolt Kit (11416). Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized. The edges of the pre-galvanized parts often lose their zinc coating during the stamping process. Because of the thinness of the coating less than 1 mm and the fact that the edges remain exposed, pre-galvanized parts can begin to oxidize and rust quickly, so its recommended that they be primed and painted.

Features

• 1-1/2″ Pre-galvanized steel uprights lean outward 15 Degree to cradle the boat
• Guide-ons are 21″ tall above the frame with 9″ roller & 2″ roller caps at top & bottom 
• Mounting hardware included for frames up to 3″ W x 4-1/4″H
• Mounting brackets allow up to 13″ of adjustment out from each side of the frame
• Sold in pairs