ELECTRONICS MOUNT-14 5/8″
ELECTRONICS MOUNT-17″
ELECTRONICS MOUNT-17″
These ball and socket mounts allow full swivel of 360 at either the top or the bottom. They are ideal for mounting fish finders, radar screens, speakers, multi-function displays, or any other accessory in a limited space or that needs to be raised. In addition, due to the unique double ball configuration, a broad range […]
EZ Steer 1812 OUTBOARD BRACKET ASSY. SMALL BRACKET ASSEMBLIES
AUXILIARY BRACKET ASSY- 4″ Features AUXILIARY BR PANTHER Steering Auxiliary Motor Steering EZ-50010
Garelick 2-Inch Diver Transon Extension Shim
With An Angled Design For Ease Of Boarding. Vertical Center Allows Easy Use With Diving Gear. Features Oval Steps With Non-Skid Surface And Quick Release Mounting Bracket With Lock For Easy Stowage. Made With White Epoxy Powder Coated Aluminum And Completely Foam Filled So It Floats. Mounts Easily On Transoms And Transom Platforms With Quick […]
Garelick 30300 Outboard Motor Carrier, 15 HP/85-Pound
MOTOR DISPLAY STAND is ideal for storage of most motors. Utilizes tough alloy 1″ aluminum tubing and stands 32-1/2″ high. Folds flat. For up to 25 H.P.. motor with maximum weight of 85#. Do not exceed weight recommendations. GARELICK EEZ-In 30300, GAR30300
Garelick 50-HP Capacity Outboard Motor Stand
Garelick 50-HP Capacity Outboard Motor Stand
MOTOR DISPLAY STAND is ideal for storage of most motors. Utilizes tough alloy 1″ aluminum tubing and stands 36″ high. Folds flat. For up to 50 H.P.. motor with maximum weight of 180 pounds. Do not exceed weight recommendations. GARELICK EEZ-In 30400, GAR30400
Garelick Eez-In Stainless Stationary Outboard Motor Brackets
OUTBOARD MOTOR BRACKETS are a fixed height mount for an auxiliary or trolling motor. Tough 18-8 stainless steel stationary, permanent brackets. 1-1/2″ thick, 8″ wide. For motors up to 15HP. Features 304 stainless brackets and hardware 1-1/2″ black poly mounting board – 8″ width For motors up to 15 hp 2-stroke
Garelick Outboard Motor Bracket
STATIONARY OUTBOARD MOTOR BRACKET is adjustable. Permanent fixed height mount with built-in transom angle and trim adjustment for auxiliary or trolling motor. Same adjustment brackets can be inverted for positive or negative use and adjust to transoms with plus or minus angles from 7-35 degree in 7 degree increments. Tough 304 stainless steel brackets. 1-1/2″ […]
Garelick Outboard Motor Bracket Adapter Plate
Garelick Outboard Motor Bracket Adapter Plate lets you quickly install and remove your motor bracket. Adapter Plate enables you to quickly remove bracket from the transom. Brackets slide into position and lock into place when in use. Anodized aluminum. Order ONLINE Today! Garelick Outboard Motor Bracket Adapter Plate ADAPTER PLAT
Garelick Plate Detachable Stanchion
DETACHABLE STANCHION PLATE is ring type. Sandwiches deck for positive reinforced installation. Allows base and seat to be removed from mounted position. Anodized aluminum 9″ diameter, 3/8″ thick complete with ring, three stainless steel cap screws, allen wrench and two backing brackets. Adapts to all model bases. GARELICK EEZ-In 75057, GAR75057
Garelick Reinforcement Mounting Plate
For Rotocast seat models without fore/aft seat slide. Accepts 99023, 99025, 99026. 13”Hx7.875″Wx 3/16” thick aluminum plate. Mounting hole pattern: 12.5”x5”. Reinforcement Plate MPN: 99070
Garelick Stainless Steel Auxiliary Outboard Motor Bracket for 2-Stroke Motors Over 7.5 HP-12 HP
H.P. Rating: Over 7 1/2 to 25 Motor Weight Not to Exceed: 118 lbs. Vertical Travel: 11 1/4″ (29cm) Mtg. Pad: Poly Mounting Board Dimensions W x H x T: 11 1/2″ x 10 3/4″ x 2″ (29 x 27 x 5cm) Mounting Bracket Dimension W x H: 7 5/8″ x 8″ (19 x 20cm) […]
Garelick/EEz-In 31600:01 Marine Outboard Motor Carrier
Garlicky/EEz-In Marine Outboard Motor Carrier – Strong aluminum tube frame. Tough alloy drawn aluminum up to 25 percent stronger than extruded tube. Semi-pneumatic rubber tired wheels. Handles motors 0-30 HP and up to 130 pounds. Height 36.75 inches. Features Strong aluminum tube frame – Tough alloy drawn aluminum up to 25 percent stronger than extruded […]
Garelick/EEz-In 31800:01 Outboard Marine Motor Carrier
Garelick Motor Carrier is ideal for outboard and trolling motors. It features semi-pneumatic rubber tired wheels. This carrier can handle motors of 30-80 horsepower and up to 265 pounds. Height 37-inch (93 centimeters). Wheels 4-10-inch x 1.75-inch (25 x 4 centimeters). Includes gas can holder. Features For outboard and trolling motors Semi-pneumatic rubber tired wheels […]
Garelick/EEz-In 71090:01 Marine Aluminum Auxiliary Motor Bracket
Garlicky/EEz-In Marine Aluminum Auxiliary Motor Bracket – 4 Stroke Motor Bracket Model – Motor weight not to exceed 169 pounds. Vertical travel 9.5 inches. Mounting Plate: PolyMounting Board Dimensions: 11.5 inch x 10.75 inch x 2 inch F Features Raise and lower trolling and auxiliary motors on power and sailboats with ease Built especially for […]
Garelick/EEz-In 99180:01 Marine Standard Transom Mounting Bracket
Garlicky/EEz-In Marine Standard Transom Mounting Bracket – Allows for additional mounting locations on boat, 1 inch thick poly spacer. 10 degree angle, with lock and stainless steel face plate mounting bracket, mounting hole diameter of 5/16 inch. SPT DIVER TRNSM MT BRKT