Marine Chandlery
Marine supplies and accessories for both power boating and sailing.Boating Accessories
Trailer accessories, life vests, fuel tanks, lubricants, anchors etcLowrance Fuel Flow Sensor w/10′ Cable & T-Connector
Fuel flow sensor, with 10′ cable and T-connectorFuel Flow Sensor Gasoline only. One required per engine. Up to 3 engines supported. Outputs:Fuel FlowTank Fuel UsedTrip Fuel UsedSeasonal Fuel UsedCable Length:10’Fuel Line Diameter:3/8″ (9.5mm) Inside DiameterFlow Rate Measured:Optimized for 0.6-45 Gal/hr but can measure outside these valuesAdded Back Pressure to the fuel system:0.5 PSI at 20 Gal/hr; 1 PSI at 40 Gal/hrInstallation Location:Above the max level of the fuel tank, in-line after the fuel filter and any Y’s or T’s in the linePackage:The Fuel Flow Sensor, N2K T and 2 (two) 1″ hose clampsFuel Type:Gasoline only. The Fuel Flow Sensor does not operate diesel engine fuel systemsHole required to route through a bulkhead:22mm (7/8″)Multiple Fule Flow sensors possible:Yes
Features
- Fuel Flow
- Tank Fuel Used
- Trip Fuel Used
- Seasonal Fuel Used
- Cable Length:10″
Related Products
Shoreline Marine Plumbing Kit 3/4″ X 5′ Hose
Plumbing Kit Includes 5′ X 3/4″ Hose, Thru-Hull fitting, and two Stainless Steel hose clamps. Excellent for replacing old plumbing in bilge or installing new bilge pump. Features Great For Replacing Or Installing Bilge Plumbing Includes 5′ Hose, Thru-Hull Fitting, And SS Hose Clamps 5′ X 3/4″ Hose Good For Salt Or Fresh Water
Scepter Marine Honda Fuel Line Assembly, Gray, 3/8″ x 7′
3/8 inch I.D. X 7′ Honda replacement EPA fuel line assembly with fittings designed and manufactured to strict OEM specifications. Constructed complete with clip style tank and engine ends, with Viton O-rings and stainless steel internal components ensure leak-proof connections. Primer bulb includes dual internal check valves to reduce back flow leakage during priming and […]
Attwood Johnson/Evinrude Fuel Kit with Fuel Demand Value, 6-Feet x 3/8-Inch
Attwood new low-permeation fuel line kit sets the standard in performance, safety and value. It includes Attwood award-winning universal sprayless Connector (Hose and tank fittings with thread sealant), multi-layer low-permeation primer bulb, fuel demand valve and fiber reinforced, low permeation fuel line. Features Includes 3/8 inch low-permeation fiber reinforced fuel hose designed to prevent kinking and […]
Titan Fuel Tanks 29907
Titan Fuel Tanks 29907
Made With Military Grade Cross-Linked Polymer. Does Not Rust Or Corrode. Reduces Condensation. Titans Polymer Is 1/3 The Weight Of Steel. Manufactured With No Welds Or Seams. 415 Times Less Heat And Cold Conductive Than Aluminum Tanks. Tougher Than Metal. Extremely Tough And Rugged. Easy Installation. 5 Year Limited Warranty. Made In The U.S.A.. Features […]