Marine Chandlery
Marine supplies and accessories for both power boating and sailing.Boating Accessories
Trailer accessories, life vests, fuel tanks, lubricants, anchors etcMarine Black Plastic Rod Holder for Boats with Cap, Flush Mount . Five Oceans
This Five Oceans black flush mount rod holder is made of high-impact ABS plastic and comes with soft black flange gasket and integral PVC flip-up cap.
It’s durable, economical and corrosion resistant.
Mounts at a 30° angle.
Features
- Flange dimensions: 4″ (105 mm) x 3-1/2″ (90 mm)
- Requires: 1/4″ fasteners (not included)
- Material: Nylon Color : black
- Tube length: 8″ (205 mm)
- Tube O.D.: 2-2/5″ (60 mm) Tube I.D.: 1-11/16” (43mm)
Related Products
Attwood Corporation 66399-3 1-13/16″ Stainless Steel Clamshell Vent
Clam Shell Ventilator – Pair–These clamshell vents can be used to seal and splash-proof openings for wire, hose, etc. Also ideal for locker vents. Made from stamped stainless steel. Requires three #6 fasteners for installation. Skin packed.F E A T U R E S-Small Clamshell Vent – Covers holes up to 3/4 inchHose or wire […]
Attwood 64839 Lock’N-Pin 3/4″ Marine Stainless Steel Pin Base Plate
Lock’N-Pin Base Plates with the 3/4 inch system gives you outstanding economical performance. The design is proven by decades of experience. Posts are available as fixed, manually adjustable, or power-adjustable. Seat mounts, posts and bases available in steel, aluminum, or stainless steel. Features 4 x 8 inch, non-threaded nylon bushing Stainless steel finish with steel […]
Attwood Corporation 13700-7 Lift’N Lock Anchor Control
Attwood Anchor inchLift’N Lock inch features Economical zinc-plated, steel anchor lift Nylon pulley system Steel sheave controls anchor from any- position. Features Economical zinc-plated, steel anchor lift Nylon pulley system
Sea Dog 337150-1 Screw Out Deck Plate, 5-7/16″ / White
Injection molded ABS. Sea-Dog Line deck plates are molded to the highest standards using top quality UV stabilizers and antioxidants. Use silicone sealant on hull or deck surface when installing the deck plate. Keep threads clean with hot soapy water. Lubricate with Vaseline or Teflon grease. Note: Avoid contact with acetone or strong solvents. Features […]