Marine Chandlery
Marine supplies and accessories for both power boating and sailing.Boating Accessories
Trailer accessories, life vests, fuel tanks, lubricants, anchors etcMarine Boat 12v Electric in Line Bilge Air Blower 130cfm 3″
Application:
Boats Bilge Ventilation ,
Engine Compartments,Galleys and Heads
Bus ventilation (engine and bathroom fumes)
Features
- Marine Boat Electric Bilge Air Blower, 12v/2.5Amp, 130CFM, 3″ Outlet Hose
- Built-in mounting feet allow easy vertical or horizontal installation
- Very low current draw, high volume air flow,long life
- Six/Four-blade fan maximizes airflow and efficiency
- Sealed motor shaft for moisture protection, Corrosion resistant ABS plastic housing
Related Products
Sierra International 116-400-3000W 3″ X 50′ White Marine Blower Hose
$28.42Buy product
Sierra International 116-400-3000W 3″ X 50′ White Marine Blower Hose
Shields Vinylvent Ducting Hose is PVC supported by anodized wire helix. It is resistant to UV and the ozone. This hose is primarily used for venting of bilge fumes. Vent Hose, 3″ x 50′, White MPN: 116-400-3000W
$28.42Buy product
XPOWER BR-282A 2-HP 1500-CFM Indoor/Outdoor Inflatable Blower, 12-Amp
$195.95$145.95Buy product
XPOWER BR-282A 2-HP 1500-CFM Indoor/Outdoor Inflatable Blower, 12-Amp
The biggest blower you will ever need. The BR-282A is meant to inflate the biggest inflatable structures with its 2HP motor that produces 1500CFM. This thing is perfect for outdoor use and weighing only 22lbs it’s very simple to move from place to place. The BR-282A uses a maximum of 12 amps, which is much […]
$195.95$145.95Buy product
Attwood Quiet Blower (White, 4-Inch)
$30.99$25.08Buy product
Attwood Quiet Blower (White, 4-Inch)
Attwood’s new and improved Turbo 4000 Series II sets the standard for in-line blower performance. Utilizing advanced fan blade design techniques, Attwood has developed a blower system that matches air flow of existing in-line blowers at a significantly reduced noise level. For added durability, Attwood incorporates an engineered plastic housing that resists deformation during installation […]
$30.99$25.08Buy product
SeaLux Marine In-Line Bilge Turbo Blower 12 Volt-3 inch dia. hose
$24.00Buy product
SeaLux Marine In-Line Bilge Turbo Blower 12 Volt-3 inch dia. hose
ISO 9097 Marine Complaint. NMMA Type Accepted. Meets ISO 8846 Marine and USCG Regulation (Ignition Protected). Wire length 12″ tinned wire. Wire thickness 16 AWG Product Features: ———Power Source 12 V ; ———Turbo Uses A Revolutionary Inline Design For Quick Efficient Ventilation of Bilge Gases ———Provides 145 cu.ft. Per Minute Airflow ; ——– Draws Only […]
$24.00Buy product


