Marine Chandlery
Marine supplies and accessories for both power boating and sailing.Boating Accessories
Trailer accessories, life vests, fuel tanks, lubricants, anchors etcAmarine-made Universal Top Mount Marine Boat Single Lever Handle Engine Control
Teleflex Morse MT2 MT3 Single Engine Control Replacement NEW
Single Lever Single Engine Control
• Dual action, throttle and shift in one lever
• Operate both throttle and shift for 1 engine
• Great for any type of boat with outboard, inboard or I/O power, gas or Diesel
• Very smooth shifting and throttle
• Pull-out handle disengages shift for throttle only warm-up
• Built-in friction to avoid throttle creep
• For use with all 33C style and other engine control cables
This is a drop in replacement for Morse MT3 single engine controls.
Will also work to replace the Morse MT2 single engine controls but you will need to check your fit.
It does not include a start in gear switch but this can be added.
This control is not made by Morse but is a perfect fitting replacement!
Features
- This control is not made by Morse but is a perfect fitting replacement!
- Dual action, throttle and shift in one lever • Operate both throttle and shift for 1 engine
- Great for any type of boat with outboard, inboard or I/O power, gas or Diesel • Very smooth shifting and throttle
- Pull-out handle disengages shift for throttle only warm-up • Built-in friction to avoid throttle creep
- Built-in friction to avoid throttle creep • For use with all 33C style and other engine control cables
Be the first to review “Amarine-made Universal Top Mount Marine Boat Single Lever Handle Engine Control”
You must be logged in to post a comment.
Related Products
Attwood Corporation 1607-3 Black Straight Fuel Tank Vent
Straight Fuel Tank Vents are packed in plastic. For use with 5/8 inch I.D. hose. Patented splash-resistant vent. Constructed of corrosion-resistant polypropylene. Meets ABYC Ventilation specifications. Maximum hull thickness: 5/8 inch. Installation hole size: 7/8 inch diameter. ATTWOOD MARINE 16073, ATT16073
Attwood Corporation 66400-3 2-3/16″ Clamshell Vent
Large Clam Shell Ventilator – Pair–These clamshell vents can be used to seal and splash-proof openings for wire, hose, etc. Also ideal for locker vents. Made from stamped stainless steel. Requires three #6 fasteners for installation. Skin packed.Large Clamshell Vent – Covers holes up to 1-1/4 inchHose or wire up to 9/16 inch diameter. 2-1/4 […]
Sea Dog 337150-1 Screw Out Deck Plate, 5-7/16″ / White
Injection molded ABS. Sea-Dog Line deck plates are molded to the highest standards using top quality UV stabilizers and antioxidants. Use silicone sealant on hull or deck surface when installing the deck plate. Keep threads clean with hot soapy water. Lubricate with Vaseline or Teflon grease. Note: Avoid contact with acetone or strong solvents. Features […]
Beckson 6″ Clear Center Pry-Out Deck Plate-White
Pry-Out Deck Plates. Beckson Developed The First Pry-Out Deck Plate. These Plates Were Designed With An Extra Heavy O-Ring To Assure A Water Tight Fit. Plates Are Provided With Non-Skid Or Smooth Surfaces For Different Installation Requirements. The Original Was Used To Access The Handle For Beckson’S Permanently Mounted Pump. The Beckson Diamond Pattern Deck […]
Reviews