Marine Chandlery
Marine supplies and accessories for both power boating and sailing.Boating Accessories
Trailer accessories, life vests, fuel tanks, lubricants, anchors etcAMRT-86170.125 * Boat Trailer Bunk Slick Kit, 8 Piece
Bolts directly onto carpeted bunk boards • Fits 2×4 standard bunk boards • Slide on or off with less effort • Easy to install • 8 Pieces 1 3/4″ X 17″ Bunk Slicks Installation Instructions for #86170 and #86164 1. With the boat on the trailer, determine the forward most point where the boat makes contact with the bunks. 2. Unload boat from the trailer. 3. Place Bunk Slick centered on the rear end of bunk so that the bunk slick is even with the end of the carpeted bunk. 4. Space Bunk Slicks on carpeted bunk and space evenly with no more than 4 inches between each Bunk Slick. 5. Area to be “covered” is from the rear end of the carpeted bunk to 5 inches past the most forward point where the boat hull comes in contact with the carpeted bunk (below). 6. Using the screws provided, attached the Bunk Slicks to the carpeted bunks. .
Features
- Bolts directly onto carpeted bunk boards
- Fits 2×4 standard bunk boards
- Slide on or off with less effort
- Easy to install
- 8 Pieces 1 3/4″ X 17″
Be the first to review “AMRT-86170.125 * Boat Trailer Bunk Slick Kit, 8 Piece”
You must be logged in to post a comment.
Related Products
CE Smith Trailer Roller Guide-On
CE Smith Trailer, 27610, Roller Guide-On. These smooth rolling guides assist in centring the boat onto the trailer. Ideal for retrieving your boat on shallow ramps where the trailer is not far into the water, when you are alone, or have a crosswind or current pushing the boat. Uprights with rollers come fully assembled, ready for […]
Reviews