Attwood Stainless Steel Barbed Standard Length Straight Thru-Hull

Polish your image with these beautiful, durable stainless steel fittings. Each Thru-Hull and Scupper Valve is available with a new silicone gasket and are backed by Attwood’s trusted Lifetime Warranty! Why specify plastic parts when these fittings will last the life of the boat? Cast from certified enhanced #316 Stainless Steel allow for strength and lifetime corrosion-resistance. We polish all visible areas to a mirror finish, then each part through a passivation for additional protection. Thick steel sidewalls withstand continual stress and hose flexing. A channel under the flange holds a bead of sealant, making it easier to install and apply a trouble free seal. All models have wrench flats or an end notch to hold as a gripping surface. One installer can tighten all connections from inside the hull. Barbed tail ends provide plenty of room to hold multiple clamps.

Features

• Short Thread is a more compact size, allowing installation near corners and in confined areas.
• Hose Size: 1 1/2″ I.D.
• Flange Dia.: 1 7/8″
• Thread O.D.: 1 7/8″, Thread Length: 1 1/4″, Barb Length: 1 1/2″, Total Length: 3 1/8″
• Install. Hole size: 2″, Thread NPSM: 1 1/2″, Max. Hull Thickness: 5/8″