Marine Chandlery
Marine supplies and accessories for both power boating and sailing.Boating Accessories
Trailer accessories, life vests, fuel tanks, lubricants, anchors etcBeckson Ventilator with Plastic Cover
VENT-O-MATE WITH PLASTIC COVER keeps boat dry all year. Draft free. Allows light below. Powered by slight breeze, will automatically exhaust up to 350 cu. ft. of stale, hot or damp air from inside a closed boat (6kt breeze). Eliminates mildew and odors. Low profile, 2-1/2″H, reducing deck clutter. Rain cannot enter even when open. Ideal for heads, galleys, forepeaks and preventing damage to interior wood cabinet work. Clear shield on top permits light to enter and grill can be closed from inside during chilly weather. Easily installed. Requires 4″ hole. Comes with 8″ protective cover. The stainless steel cover is recommended for high traffic areas.
Features
- Automatically exhausts stale, hot and moisture-laden air from inside a closed boat to help eliminate mildew and keep odors from accumulating
- Wind moving over the open grill on top creates a partial vacuum that literally sucks air out of the boat
- Removes 350 ft³ of air per hour with a breeze of only 6 mph
- Can completely change the air in a 30′ sailboat in approximately 2 hours
Be the first to review “Beckson Ventilator with Plastic Cover”
You must be logged in to post a comment.
Related Products
Sea Dog 337150-1 Screw Out Deck Plate, 5-7/16″ / White
Injection molded ABS. Sea-Dog Line deck plates are molded to the highest standards using top quality UV stabilizers and antioxidants. Use silicone sealant on hull or deck surface when installing the deck plate. Keep threads clean with hot soapy water. Lubricate with Vaseline or Teflon grease. Note: Avoid contact with acetone or strong solvents. Features […]
Attwood Corporation 66400-3 2-3/16″ Clamshell Vent
Large Clam Shell Ventilator – Pair–These clamshell vents can be used to seal and splash-proof openings for wire, hose, etc. Also ideal for locker vents. Made from stamped stainless steel. Requires three #6 fasteners for installation. Skin packed.Large Clamshell Vent – Covers holes up to 1-1/4 inchHose or wire up to 9/16 inch diameter. 2-1/4 […]
Screw Out Deck Plate – Available in Various Sizes and Colors
These leak-proof ABS deck plates are sealed with an innovative gasket to assure a watertight seal. Even if the gasket is removed, Beckson’s patented back-up sealing wall leaves the plate watertight. Designed to provide access without the use of tools, with a single start non-jamming (no cross threading), extra strong, self-cleaning buttress thread. Clear plate […]
Sea Dog 337145-1 Screw Out Deck Plate, 4-7/16″ / Black
Injection molded ABS. Sea-Dog Line deck plates are molded to the highest standards using top quality UV stabilizers and antioxidants. Use silicone sealant on hull or deck surface when installing the deck plate. Keep threads clean with hot soapy water. Lubricate with Vaseline or Teflon grease. Note: Avoid contact with acetone or strong solvents. Features […]
Reviews