CE Smith Trailer Bunk Board Guide-On, 2′

CE Smith Trailer, 27660, 2′ Bunk Board Guide-On. Carpeted bunk boards provide proper center loading even in wind or side current conditions. For larger trailer frames check out our Large Frame U-Bolt Kit (11416). Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized. The edges of the pre-galvanized parts often lose their zinc coating during the stamping process. Because of the thinness of the coating less than 1 mm and the fact that the edges remain exposed, pre-galvanized parts can begin to oxidize and rust quickly, so its recommended that they be primed and painted.

Features

• 1-1/2″ square pre-galvanized uprights, angled out at 75 Degree
• 2” x 4” x 24″ boards tilt to hug the hull and are covered with high grade marine carpet; boards are untreated Southern yellow pine
• Height of 21” with adjustment out to 13″ from frame on each side
• Can be mounted on top of frame for extra height
• Complete with mounting hardware to fit frames up to 3” wide x 4-1/4” high