Marine Chandlery
Marine supplies and accessories for both power boating and sailing.Boating Accessories
Trailer accessories, life vests, fuel tanks, lubricants, anchors etcJabsco 3″ Flangemount Blower – 105 CFM – 12V
DC 105 CFM Flangemount 3″ Blowers, Jabsco blowers are primarily intended for intermittent duty cycles such as evacuating fuel vapors from bilge areas. If desired, they also may be used for other general air circulation applications with longer duty cycles. However, when doing so, it should be noted that the maximum motor life is approximately 1000 hours. Therefore, the blower should only be used for applications if this length of service is acceptable. Features: Tough Reinforced Plastic Housing, Mount to any surface, Slip-On Inlet and Outlet Ducting Connection, Efficient High Volume Air Flow, Low Current Draw, Corrosion-Resistant Materials Throughout, N.M.M.A. Type Accepted, Meets USCG Regulation 183.410 and ISO 8846 MARINE for Ignition Protection, Complies with ISO 9097 MARINE.
Be the first to review “Jabsco 3″ Flangemount Blower – 105 CFM – 12V”
You must be logged in to post a comment.
Related Products
XPOWER BR-252A 1-HP 1000-CFM Indoor/Outdoor Inflatable Blower, 9.8-Amp
With a full horsepower motor pushing out 1000CFM, this is the perfect blower for medium to large size inflatable structures. This blower is super reliable and works great outdoors. This blower also works great for air circulation and ventilation and is UL/CUL outdoor use certified. What’s the most important thing when it comes to a […]
Attwood Quiet Blower Water Resistant (White, 4-Inch)
The first vane axial-flow fan bilge blowers designed using aerospace technology to maximize performance. No other bilge blowers in the industry provide such powerful system output at such a low power input in a compact size. Features Nickel-plated motor can for corrosion resistance Stiffening ribs to reduce housing distortion Motor cap to seal wires and […]
Attwood Quiet Blower (White, 4-Inch)
Attwood Quiet Blower (White, 4-Inch)
Attwood’s new and improved Turbo 4000 Series II sets the standard for in-line blower performance. Utilizing advanced fan blade design techniques, Attwood has developed a blower system that matches air flow of existing in-line blowers at a significantly reduced noise level. For added durability, Attwood incorporates an engineered plastic housing that resists deformation during installation […]
Rule 140 Marine Bilge Blower (3-Inch, Inline)
Rule In-Line Blower – 3″ DuctingDesigned for efficient, high output operation, these blowers feature our exclusive front and rear shaft seals and corrosion resistant motor housings for long life. Compact and easily installed on any flat surface, Rule® in-line blowers provide higher air flow, lower amp draw, and quieter operation than standard blowers. 3 Year […]
Reviews