Marine Chandlery
Marine supplies and accessories for both power boating and sailing.Boating Accessories
Trailer accessories, life vests, fuel tanks, lubricants, anchors etcNicro N28810 Air Vent 500, frosted polycarbonate
AIR VENT 2000 is a low cost, high volume passive exhaust vent. Only 7″ in diameter x 1-3/4″ High, yet will move over 1000 cubic feet of air per hour in a 15 knot breeze. Includes a translucent frosted polycarbonate center damper that rotates for full closure and allows light to pass below.
- NICRO VENTILATION SYSTEMS N28810, NVSN28810
Be the first to review “Nicro N28810 Air Vent 500, frosted polycarbonate”
You must be logged in to post a comment.
Related Products
Attwood Corporation 66400-3 2-3/16″ Clamshell Vent
Large Clam Shell Ventilator – Pair–These clamshell vents can be used to seal and splash-proof openings for wire, hose, etc. Also ideal for locker vents. Made from stamped stainless steel. Requires three #6 fasteners for installation. Skin packed.Large Clamshell Vent – Covers holes up to 1-1/4 inchHose or wire up to 9/16 inch diameter. 2-1/4 […]
Attwood 64839 Lock’N-Pin 3/4″ Marine Stainless Steel Pin Base Plate
Lock’N-Pin Base Plates with the 3/4 inch system gives you outstanding economical performance. The design is proven by decades of experience. Posts are available as fixed, manually adjustable, or power-adjustable. Seat mounts, posts and bases available in steel, aluminum, or stainless steel. Features 4 x 8 inch, non-threaded nylon bushing Stainless steel finish with steel […]
Screw Out Deck Plate – Available in Various Sizes and Colors
These leak-proof ABS deck plates are sealed with an innovative gasket to assure a watertight seal. Even if the gasket is removed, Beckson’s patented back-up sealing wall leaves the plate watertight. Designed to provide access without the use of tools, with a single start non-jamming (no cross threading), extra strong, self-cleaning buttress thread. Clear plate […]
Sea Dog 337150-1 Screw Out Deck Plate, 5-7/16″ / White
Injection molded ABS. Sea-Dog Line deck plates are molded to the highest standards using top quality UV stabilizers and antioxidants. Use silicone sealant on hull or deck surface when installing the deck plate. Keep threads clean with hot soapy water. Lubricate with Vaseline or Teflon grease. Note: Avoid contact with acetone or strong solvents. Features […]
Reviews