Marine Chandlery
Marine supplies and accessories for both power boating and sailing.Boating Accessories
Trailer accessories, life vests, fuel tanks, lubricants, anchors etcSeaLux Marine In-Line Bilge Turbo Blower 12 Volt-3 inch dia. hose
ISO 9097 Marine Complaint. NMMA Type Accepted. Meets ISO 8846 Marine and USCG Regulation (Ignition Protected). Wire length 12″ tinned wire. Wire thickness 16 AWG Product Features: ———Power Source 12 V ; ———Turbo Uses A Revolutionary Inline Design For Quick Efficient Ventilation of Bilge Gases ———Provides 145 cu.ft. Per Minute Airflow ; ——– Draws Only 2.7 Amps For Longer Blower and Battery Life Exceeds Other Blowers By Up to 25% ; ———Water Resistant; ———Quiet Working ———Hose Diameter: 3″ (76 mm), ———Blower Dimensions: 5-1/16″ ( 128 mm) Length; 5-5/16″ (135 mm )Width; 3-3/4″ (95 mm) Depth;
Features
- SeaLux In-Line Blowers provide ventilation for engine, compartments bilges, galleys and head closets
- Designed with wider stable base plate to prevent vibration and oval slates for aesthetics and ease of installation.
- Heavy duty Shaft seal for moister protection.
- Waterproof boot over motor to protect from water intrusion.
- Efficient high volume air flow and low current draw. Large barb for ease of duct connection.
Be the first to review “SeaLux Marine In-Line Bilge Turbo Blower 12 Volt-3 inch dia. hose”
You must be logged in to post a comment.
Related Products
Rule 140 Marine Bilge Blower (3-Inch, Inline)
Rule In-Line Blower – 3″ DuctingDesigned for efficient, high output operation, these blowers feature our exclusive front and rear shaft seals and corrosion resistant motor housings for long life. Compact and easily installed on any flat surface, Rule® in-line blowers provide higher air flow, lower amp draw, and quieter operation than standard blowers. 3 Year […]
SEAFLO 3″ In-Line Blower Bilge 12V w/Quiet Operation Low Amp Draw
SPECIFICATION: SKU: SF01012 Voltage: 12V Air Flow: 130.0 (CFM) Amp Draw: 2.5 (A) Fuse: 5.0 (A) Intake Pipe Dia: 3″/78mm Product Feature: 1. Built-in mounting feet allow easy vertical or horizontal installation. 2. Low amp draw motor for longer blower and battery life. 3. Four-blade fan maximize airflow and efficiency. 4. Sealed motor shaft for […]
Marine Air Blower Boat Bilge Flange Mount Heads Galleys Ventilation Fan 12V
Features: Low-current draw Continous duty Igntion protected meets ISO 8846 Corrosion resistant ABS plastic housing Mounts to any flat surface Slip-on inlet”outlet ducting connections Complying with ISO 8846 Application:Designed to remove gasoline vapors from enclosures, these blowers are also a medium-duty, versatile means of exhausting warm air from galleys and engine rooms, ventilating odors or […]
SEAFLO 4″ In-Line Marine Bilge Air Blower 12V 270 CFM Quiet Boat White
NEW 12V In-Line Air Blower Hi-Flow Capacity 270CFM, Suits 4″ Diameter Hose Included: 12v In-Line Blower Set of Installation and Operating Instructions Product Description This product is a 100% Brand New Beware of inferior non-genuine products on the market that claim to be just as good Provides ventilation for engine compartments, galleys, bilges and heads […]
Reviews